NEW USERS PLEASE READThe new user registration issues have now been resolved.
If you have tried to register as a new user in the last few days and not yet received a password please register again.
Topics
EventsThere are no upcoming eventsOlder StoriesWednesday 10-JanThursday 21-DecSaturday 16-DecThursday 17-AugWednesday 10-MayFriday 14-AprTuesday 21-FebSunday 01-Jan |
Welcome to Splack Linux Splack 8.0 on Netra 105 and Javastation I have Splack 8.0 installed and running on a Sun Netra T105 which has 256MB RAM and using a serial terminal.It seems to be working as it should but I want to be able to run X so I can use it with PC-Xware. If I run startx It says can't open /dev/tty0. I also want to use it with a Krupps Javastation which is why I installed Splack in the first place. The Javastation says no dhcp response received. Is there a simplae way I can at least test my Javastations? BTW, they are version 3.11 which I have read can't be booted from linux. Splack 8.0 on Sun Netra I am trying to install Splack 8.0 on a Sun Netra T105 using a serial terminal.
I get as far as logging on as root and getting the Bummer tty2 and tty3 messages. I fixed that by following the instructions for the workaround, but I can't get Splack install to recognise my cdrom as the source. I get a message refering me to FAQ.TXT for info on how to copy some of the cdrom to hard disk to install but there is no mention of that in FAQ.TXT.
10.2rc5 on UltraSparc60 To Splack Team,Many thanks for your great job! I recently got UltraSparc60 box system and version 10.2.rc5 works fine. # Below "lspci" output after the first reboot: # ---------------------------------------------------------- 00:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module 00:01.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 00:01.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 00:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 00:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 14) 01:00.0 Host bridge: Sun Microsystems Computer Corp. Psycho PCI Bus Module 01:01.0 PCI bridge: Digital Equipment Corporation DECchip 21152 (rev 03) 02:00.0 Bridge: Sun Microsystems Computer Corp. EBUS (rev 01) 02:00.1 Ethernet controller: Sun Microsystems Computer Corp. Happy Meal (rev 01) 02:04.0 SCSI storage controller: QLogic Corp. ISP1020 Fast-wide SCSI (rev 05) Again Thx xorg.conf I've merged a couple of xorg.conf files from Debian with the one distributed with rc.5, it works well on an E4500 with cgsix and should be OK on ATI or Creator 3D.I've done my best to retain as much of the original Slackware comments etc. as are appropriate. Somebody please tell me where to send it if it's likely to be of any use to the project. -- MarkMLl Progress - was - Project suspended Due to an extended lack of progress the Splack project has been suspended until a new team can be found to take over. Well, it looks like we are getting somewhere. Gregsparc has uploaded his work which was a separate project and is now merging it into Splack. Take a look in the gregbeta directory on the mirrors. No installer yet, but most of the updated packages are there if you would like to upgrade. |
Who's OnlineGuest Users: 3What's NewStoriesNo new storiesComments last 2 daysNo new commentsLinks last 2 weeksNo recent new links |
|
Copyright © 2008 Splack Linux All trademarks and copyrights on this page are owned by their respective owners. |
Powered By Geeklog Created this page in 0.30 seconds |